Smarty Junior J-06 2003 - 2007 Dodge Ram 5.9 Cummins Diesel

Smarty Junior J-06 2003 - 2007 Dodge Ram 5.9 Cummins Diesel

CaTCHER software's inside Three different  performance levels: 40 / 70 / 100 hp Improved fuel economy Optimized drivability Fastest download in the industry, a typical ECM update takes about 3.5 to 5 minutes, depending on the truck model ABS tire...

$ 495.00
  • Category: Cummins 2003 – 2004 5.9L Electronics, Cummins 2004.5 – 2005 5.9L Electronics, Cummins 2006 – 2007 5.9L Electronics
  • CaTCHER software's inside
  • Three different  performance levels: 40 / 70 / 100 hp
  • Improved fuel economy
  • Optimized drivability
  • Fastest download in the industry, a typical ECM update takes about 3.5 to 5 minutes,
    depending on the truck model
  • ABS tire height updates in just few seconds from 22,5" to 44"
  • Not traceable in the stock setting. Smarty leaves no footprint
  • Manual High-Idle is enabled in all softwares
  • Reads  Diagnostic Trouble Codes in plain text
  • No tools required, no fuses to pull
  • USB built in for simple updates from internet
  • Easy installation
  • Reliable, it works off your OEM hardware
  • Now with the Power on Demand function!!!
  •  

    Fast guide to Smarty-JR software levels

     

    The horsepower settings have a modified "Torque management" (
    TQM ). The throttle response is greatly improved but is set to a safe
    limit. With "Safe" I mean safe for your tranny and rest of the driveline.

     

    • SW # 1 : 40 hp increase
    • SW # 2 : 70 hp increase
    • SW # 3 : 100 hp increase

     

    Tested on stock trucks on a Dyno.
    Stock means just that. Stock! Even the air filters were stock...

    The trucks were S T O C K, even the wastegate settings!
    We checked the "baseline" ( the stock truck hp at the rear wheels )
    twice in a day in order to be sure about our findings. The above
    declared hp numbers are all rounded down to the closest number.

    No trace is left in the ECM!
    I herby CLAIM that SmartyCR is the FIRST AND ONLY downloader
    that does not erase any of the stored data in the ECM. Smarty does
    NOT leave any electronic footprints in the ECM or any other electronic
    module in the truck. Smarty does NOT set ANY codes once the ECM is
    set back to stock. Smarty does NOT need to have fuses pulled.



    Yet, Smarty can not do one thing for you. Fix what others have
    broken. Smarty can not restore a key on counter that another
    downloader has erased . Smarty can not fix VIN# troubles caused by
    other products. If your Check engine / ABS light is on because another
    product has screwed your ECM, Smarty can not fix it, the other guy
    HAS to...

    ABS / Speedo recalibration
    The tire height can be adjusted up to 44" 

    DTC Code reader
    The name says it all.
    You can read and erase codes. Codes are displayed also in plain
    English. That's old news by now. Smarty S-03 was the first one to
    provide that utility, others found the idea to be a good one too.  
    ( Smarty does erase ABS codes too but does not display them )

    ECM update speed
    Faster than anything else on the market! Again we've done our
    homework on the protocol. Less than 5 minutes. Three times faster
    than a Star-Scan diagnostic tool or competitor.

    We have developed our own bootloader in order to not have to pull
    fuses should an update become interrupted for any reason. All you
    have to do is to turn the key off / key on Smarty does everything else
    on it's own.

    Updates
    The CaTCHER softwares as they are today are only a starting point.
    Expect major news in future. We’re for your feedback, opinions, likes,
    dislikes...
    We will make Smarty do what YOU want, TOGETHER.