AirDog II A6SPBD253 DF-100 Air/Fuel Separation System 1998.5 - 2004 Dodge Cummins (Without In-Tank Pump)

AirDog II A6SPBD253 DF-100 Air/Fuel Separation System 1998.5 - 2004 Dodge Cummins (Without In-Tank Pump)

The PureFlow AirDog II  DF-100 Air/Fuel Separation System for your 1998.5 - 2004 Dodge 5.9L Cummins provides the most effective technology designed specifically to remove water, particulates, vapor and entrained air from the diesel fuel in your truck. The AirDog...

$ 725.00
  • Category: Cummins 1998 – 2002 24V 5.9L Fuel Systems, Cummins 2003 – 2004 5.9L Fuel Systems
The PureFlow AirDog II  DF-100 Air/Fuel Separation System for your 1998.5 - 2004 Dodge 5.9L Cummins provides the most effective technology designed specifically to remove water, particulates, vapor and entrained air from the diesel fuel in your truck. The AirDog II is a lift pump and filtration system that enhances the fuel delivery to your engine with a commercial duty system. The AirDog II features the one-of-a-kind Demand Flow Technology which improves on the original AirDog design, by only drawing the required fuel needed by your engine.

Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine from producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog II eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog II also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!
The Airdog II features the one-of-a-kind Demand Flow Technology. The AirDog System functions by taking fuel from the tank, and passing it through the water separator which removes large particulate contaminates. Then, fuel under positive pressure flow enters the fuel filter. As the fuel passes through the fuel filter, the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the positive fuel air separation features of the patented AirDog® II the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port.
The fuel passing through the filter is now free of contaminants and power robbing air/vapor. At pressures and flows able to meet the needs of the engine, it exits the fuel filter through two passageways. First, the fuel for the engine, passes into the fuel pickup tube and on to the engine. Then, the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.

Features:

  • 100 GPH @ 15-17 PSI (Stock-500HP)
  • Removes Air & Water From Fuel 
  • Increased Horsepower & Torque 
  • Optimized Engine Performance 
  • Improved Throttle Response 
  • Increased Fuel Economy 
  • Lifetime Limited Express Warranty
Application Note: This pump is for use on trucks that have the factory lift pump in the factory location. If your pump has been retro-fitted to the in-tank conversion, you must purchase kit #A5SPBD354 (see related items).